With the continuous innovation of new building materials, wear-resistant ceramic lining plates have been widely used, which can be applied to all mechanical equipment with high wear and tear, such as mines, chemicals, cement, ports and docks. Some users are interested in this product and would like to know the density of wear-resistant ceramic lining?

1. The density of ceramics should be the same as that of stones. Ceramics, also known as artificial stones, have a composition similar to that of ceramic minerals. The density of the stone is 2.7/m3.

2. The alumina content of wear-resistant ceramic lining plate is 92%, which is generally the same. 95% is also used for special needs, but the cost-effectiveness of 95% is not high. The density of 92 wear-resistant ceramic tiles is 3.6g/cm3. The density of ceramic lining is between 2.4-2.9. Theoretical density, also known as true density, is the density of each powder in a powder when there are no pores at all. In fact, if the powder system is composed of a single mineral phase, the theoretical density of the powder can be directly calculated from the crystal structure based on the density of the mineral single crystal.

The wear-resistant ceramic lining plate has a thin thickness and is mainly used in places where wear is not particularly severe and the temperature is not very high. Because the ceramic lining is fixed with glue, the temperature used is limited by the glue.