With the continuous innovation of new building materials, wear-resistant ceramic lining plates have been widely used, which can be used in all heavily worn mechanical equipment such as mines, chemicals, cement, ports and docks. Some users are interested in this product and would like to know the density of wear-resistant ceramic lining plates?

1. The density of ceramics should be the same as that of stones, and ceramics, also known as artificial stones, have the same composition as ceramic ores. The density of stone is 2.7/m3.

2. The alumina content of wear-resistant ceramic lining plate is 92%, which is generally the same. 95% is also used for special needs, but the cost-effectiveness of 95% is not high. The density of 92 wear-resistant ceramic sheets is 3.6g/cm3. The density of ZTA ceramic lining board is around 4.23g/cm3. Theoretical density, also known as true density, is the density of each powder without any pores. In fact, if the powder system is composed of a single mineral phase, the theoretical density of the powder can be calculated directly from the crystal structure, which can be seen as the density of the mineral single crystal.

The wear-resistant ceramic lining plate has a thin thickness and is mainly used in areas where wear is not particularly severe and the temperature is not very high. Because the ceramic lining is fixed with glue, the temperature used is limited by the glue.