The honeycomb arrangement contour of the honeycomb ceramic is shaped by extrusion molding. Its form is determined by the form of the mould.
The design and fabrication of extrusion dies is an integral technology in the creation of honeycomb ceramics.
Extrusion dies are usually made using 45 gauge steel or perish steel.
The thickness of the hole to the sand hole is 6 to 10 mm, carrying a square honeycomb arrangement for instance.
The cable cutting thickness is 3 to 10 mm and its width is that the wall thickness of this item, usually in the selection of 0.2 to 0.5 mm. The proportion of this region of the round hole into the region of the cross hole ought to be (1.1 to 1.2): 1 is proper.
For large-hole goods, 1 feed hole provides a honeycomb sand; for small-hole goods, 1 feed hole may replace roughly 5/4 honeycomb solids.
The extrusion molding procedure is: Subsequent to the sand material is blended, extruded, cut, and eventually glued out of the mould.
If you want to buy high quality item, you should find a professional
Honeycomb Ceramics Supplier from China with competitive price.
Now browsing our website https://www.zbzawa.com and find your satisfactory goods.