According to the drawings provided by the customer, we designed a product plan. This afternoon, the customer sent a drawing through WeChat asking if there was a suitable wear liner size. After two hours of analysis and design by colleagues, the customer was very satisfied and immediately paid a deposit. produce!
Figures 1 and 2 are customer equipment drawings.
With 200*48/45.5*25 specifications, 59 pieces per lap.
Figure 1 Fits to specification: W1 - W2 = 3 mm W1 - V1 = 3 mm
Figure 2 is suitable for specifications: W1 - W2 = 3.5mm W1 - V1 = 3.5 mm