Today we Alumina Ceramic Grinding Ball Manufacturer come to summarize What is the resistance coefficient of the elbow performance of ceramic wear-resistant pipes in industrial applications.
ceramic wear-resistant pipes in industrial applications?
The Ceramic Wear Resistant Tube has a high wear resistance for the grinding medium conveyed by the metallurgy, electric power, mining, coal, and other industries in the industrial application. The operation of the industry proves that the wear-resisting life of ceramic wear-resistant pipes is ten times or even several times that of hardened steel. In the industry, the wear resistance of ceramic wear-resistant pipes is small. Because the inner surface of the ceramic wear-resistant tube is smooth and never rusted, it does not have a convex spiral on the inner surface of the seamless steel tube. The inner surface smoothness is better than any metal pipe by the relevant test unit for the roughness of the inner surface and the water resistance. The coefficient of corrosion is 0.0193, which is slightly lower than the seamless pipe. Therefore, the ceramic wear-resistant tube has the characteristics of small running resistance and can reduce the running cost.
At the same time, the ceramic wear-resistant tube has the application function in the industry. The wear-resistant ceramic elbow of the ceramic wear-resistant tube is made of a wear-resistant elbow according to the parameters, and then the prepared wear-resistant lining adheres to the inner wall of the wear-resistant elbow with high-strength wear-resistant glue. The liner of the ceramic wear tube is a rare metal oxide as a flux.
Ceramic wear-resistant pipe is a special function widely used in coal, steel, mining, chemical, cement, port and other enterprises for coal, conveying systems, milling systems, ash discharge, dust removal systems, etc. On all mechanical equipment with large wear and tear, different types of products can be selected according to different needs. The application function of ceramic wear-resistant pipe: high hardness, the hardness of the pipe is second only to diamond, far exceeding the wear-resisting function of wear-resistant steel and stainless steel. The wear-resisting performance of the ceramic wear-resistant tube is excellent. In the industrial application, the wear resistance is 266 times that of manganese steel and 171.5 times that of high-chromium cast iron. Ceramic wear-resistant pipes can extend the service life of equipment by at least ten times under equal working conditions. The material of the ceramic wear-resistant tube has a density of 3.5g/cm3 and is light in weight, only half of the steel, which can greatly reduce the equipment load. And it has strong bonding and good heat resistance in industrial applications. The wear-resistant ceramic sheet of the ceramic wear-resistant tube adheres to the inner wall of the device with heat-resistant strong glue. It can be operated for a long time at 350 ° C without aging, and the inorganic binder for the cemented product is resistant to 750 ° C. Adhesive temperature resistance and adhesion performance indicators are far ahead in the sea.